About Uvalde Estates Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Uvalde Estates: Uvalde EMS, Inc 155.1000 MHz, FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Uvalde County EMS talkgroup 3928 (hex f58).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Uvalde Estates, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS), about 8 miles away. Its control channels: 154.8825, 155.67 MHz.
Data updated .
Uvalde County channels that also cover Uvalde Estates
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Reagan Wells Volunteer Fire Department | Reagan Wells Volunteer Fire Department – Tactical Channel | 155.8500 In 153.8750 | 141.3 PL | FMN | WQAC657 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Uvalde EMS, Inc | Uvalde EMS Primary | 155.1000 In 158.7750 | 186.2 PL | FM | WPXD888 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Uvalde County Hospital | Hospital Authority | 154.8600 In 159.4200 | FMN | WQCG643 | |
| Uvalde County Hospital | Hospital Authority | 155.9550 In 151.2350 | FMN | WQCG643 |
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Uvalde County EMS | Uvalde County EMS – Dispatch | 3928 | f58 | D |
Nearest trunked radio sites
Distances are measured from the center of Uvalde Estates.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Uvalde Estates?
We do not have a EMS dispatch channel listed specifically for Uvalde Estates. The county-level EMS dispatch channels in the same county: Uvalde EMS, Inc 155.1000 MHz, FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Uvalde Estates?
Yes. The county-level systems that cover Uvalde Estates are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Uvalde Estates?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Uvalde Estates?
For Uvalde Estates, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.8825, 155.67 MHz. Program a control channel first; the scanner finds the voice channels from it.