About Uvalde County Police Frequencies
Quick answer: Dispatch for Uvalde County: Uvalde County Sheriff 155.7000 MHz, narrow FM, 186.2 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Uvalde County Sheriff talkgroup 3895 (hex f37).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Uvalde County, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels: 154.8825, 155.67 MHz.
Data updated .
Uvalde County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Uvalde County Sheriff | Fire/EMS Dispatch (Knippa) and outside agencies to Sheriff | 155.7000 In 154.7850 | 186.2 PL | FMN | KVP507 |
Uvalde County trunked talkgroups
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Uvalde County Sheriff | Uvalde County Sheriff – Dispatch | 3895 | f37 | D |
| Uvalde County Sheriff | Uvalde County Sheriff – Dispatch | 3898 | f3a | D |
Radio system sites in Uvalde County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Uvalde County
Common questions
What frequency do the police use in Uvalde County?
Dispatch channels listed for Uvalde County: Uvalde County Sheriff 155.7000 MHz, narrow FM, 186.2 PL.
What is the sheriff's dispatch frequency in Uvalde County?
Uvalde County Sheriff 155.7000 MHz, narrow FM, 186.2 PL.
Do the police use a trunked radio system in Uvalde County?
Yes. Law-enforcement talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Uvalde County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Uvalde County?
For Uvalde County, start with the Uvalde site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.8825, 155.67 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Uvalde County police frequencies encrypted?
None of the 1 conventional frequencies listed for Uvalde County are marked encrypted.
Are Uvalde County police talkgroups encrypted?
None of the 2 talkgroups listed for Uvalde County are marked encrypted.