Skip to content

Ackerly Fire and EMS Frequencies

We do not have frequencies listed specifically for Ackerly in Martin County, Texas yet. Countywide channels for Martin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 27 miles away.

Ackerly also extends into Dawson County.

About Ackerly Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ackerly: Martin County Fire 154.1975 MHz, narrow FM, 023 DPL. County-level ems dispatch that covers Ackerly: Martin County EMS 155.3400 MHz, narrow FM, 91.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Martin County channels that also cover Ackerly

Fire Dispatch

Fire Dispatch frequencies for Martin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Martin County FireVolunteer Fire Dispatch154.1975
In 155.7975
023 DPLFMNWQNP759

EMS Dispatch

EMS Dispatch frequencies for Martin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Martin County EMSMartin County EMS – Dispatch155.340091.5 PLFMNKNHM213

Hospitals & Medical

Hospitals & Medical frequencies for Martin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Martin County HospitalHospital District155.8725
In 153.9875
156 DPLFMNKNHM213

Nearest trunked radio sites

Distances are measured from the center of Ackerly.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 27 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 28 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Patricia · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 87 (hex 57) · NAC 130 · about 33 mi away
Control 152.6225, 155.295
Voice 155.1675, 155.9475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ackerly?

We do not have a fire dispatch channel listed specifically for Ackerly. The county-level fire dispatch channels in the same county: Martin County Fire 154.1975 MHz, narrow FM, 023 DPL.

What frequency does EMS or the ambulance service use in Ackerly?

We do not have a EMS dispatch channel listed specifically for Ackerly. The county-level EMS dispatch channels in the same county: Martin County EMS 155.3400 MHz, narrow FM, 91.5 PL.

What scanner do I need to listen to fire and EMS in Ackerly?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ackerly?

For Ackerly, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.