Skip to content

Welch Fire and EMS Frequencies

We do not have frequencies listed specifically for Welch in Dawson County, Texas yet. Countywide channels for Dawson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Patricia (Greater Austin/Travis Regional Radio System (GATRRS)), about 31 miles away.

About Welch Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Welch: Dawson County EMS 462.9500 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Dawson County channels that also cover Welch

EMS Dispatch

EMS Dispatch frequencies for Dawson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dawson County EMSDawson County EMS – Dispatch462.9500
In 467.9500
FMWQBH312

Nearest trunked radio sites

Distances are measured from the center of Welch.

Patricia · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 87 (hex 57) · NAC 130 · about 31 mi away
Control 152.6225, 155.295
Voice 155.1675, 155.9475
Campus · Texas Tech University
RFSS 1 · Site 1 (hex 1) · NAC 931 · about 47 mi away
Control 858.4625, 858.9625, 859.4375, 859.9625
Voice 854.9625, 855.2125, 855.9625, 856.4375
Ransom Canyon · Lubbock City-County Mutual Radio System
RFSS 4 · Site 4 (hex 4) · NAC E · about 49 mi away
Control 856.2375, 857.2375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Welch?

We do not have a EMS dispatch channel listed specifically for Welch. The county-level EMS dispatch channels in the same county: Dawson County EMS 462.9500 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Welch?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Welch?

For Welch, start with the Patricia site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.6225, 155.295 MHz. Program a control channel first; the scanner finds the voice channels from it.