Skip to content

Pearsall Fire and EMS Frequencies

We do not have frequencies listed specifically for Pearsall in Frio County, Texas yet. Countywide channels for Frio County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cotulla (Greater Austin/Travis Regional Radio System (GATRRS)), about 34 miles away.

About Pearsall Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pearsall: Frio County Fire 155.8050 MHz, FM, 141.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Frio County channels that also cover Pearsall

Fire Dispatch

Fire Dispatch frequencies for Frio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Frio County FireFire / EMS Dispatch155.8050
In 153.9950
141.3 PLFMWNXY757

Nearest trunked radio sites

Distances are measured from the center of Pearsall.

Cotulla · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 29 (hex 1D) · NAC 13F · about 34 mi away
Control 154.4075, 155.3025
Voice 154.235
West Simulcast · Alamo Area Regional Radio System (AARRS)
RFSS 70 · Site 70 (hex 46) · NAC 50 · about 46 mi away
Control 851.25, 851.875, 852.7, 852.9375, 853.1375, 853.4125, 855.0625, 855.4625, 855.6375, 856.2875, 856.9875, 857.3625, 857.4375, 857.9875
Crystal City · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 15 (hex F) · NAC 137 · about 47 mi away
Control 155.145, 156.1425
Voice 151.0625, 155.595
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pearsall?

We do not have a fire dispatch channel listed specifically for Pearsall. The county-level fire dispatch channels in the same county: Frio County Fire 155.8050 MHz, FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Pearsall?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pearsall?

For Pearsall, start with the Cotulla site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 154.4075, 155.3025 MHz. Program a control channel first; the scanner finds the voice channels from it.