Skip to content

Devine Fire and EMS Frequencies

Devine in Medina County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is West Simulcast (Alamo Area Regional Radio System (AARRS)), about 25 miles away.

About Devine Fire and EMS Frequencies

Quick answer: Fire dispatch for Devine: Devine Fire 154.1900 MHz, narrow FM, 123.0 PL. EMS dispatch for Devine: Devine EMS 154.8450 MHz, narrow FM, 203.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Devine conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Devine
AgencyDescriptionFrequency (MHz)ToneModeFCC
Devine FireDevine Fire Dispatch154.1900123.0 PLFMNKLP915

EMS Dispatch

EMS Dispatch frequencies for Devine
AgencyDescriptionFrequency (MHz)ToneModeFCC
Devine EMSDevine Police/EMS Primary154.8450
In 158.8050
203.5 PLFMNKNHQ883

Medina County channels that also cover Devine

Fire Dispatch

Fire Dispatch frequencies for Medina County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medina County FireFire/EMS Primary – Digital Side155.3025
In 158.8650
NAC 300P25WQYC573
Medina County FireFire/EMS Primary155.3025
In 158.8650
186.2 PLFMNWQYC573
Medina County FireFire/EMS Secondary158.7600
In 154.1000
203.5 PLFMNKVF684

Nearest trunked radio sites

Distances are measured from the center of Devine.

West Simulcast · Alamo Area Regional Radio System (AARRS)
RFSS 70 · Site 70 (hex 46) · NAC 50 · about 25 mi away
Control 851.25, 851.875, 852.7, 852.9375, 853.1375, 853.4125, 855.0625, 855.4625, 855.6375, 856.2875, 856.9875, 857.3625, 857.4375, 857.9875
Harlandale (South San Antonio) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 35 (hex 23) · NAC 130 · about 27 mi away
Control 769.76875, 770.29375
Voice 771.09375, 772.36875, 773.14375, 774.91875
NW San Antonio · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 55 (hex 37) · NAC 130 · about 31 mi away
Control 774.06875, 774.53125
Voice 770.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Devine?

Fire dispatch channels listed for Devine: Devine Fire 154.1900 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Devine?

EMS dispatch channels listed for Devine: Devine EMS 154.8450 MHz, narrow FM, 203.5 PL.

What scanner do I need to listen to fire and EMS in Devine?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Devine?

For Devine, start with the West Simulcast site of Alamo Area Regional Radio System (AARRS). Its control channels are 851.25, 851.875, 852.7, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Devine fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Devine are marked encrypted.