Skip to content

Lytle Fire and EMS Frequencies

We do not have frequencies listed specifically for Lytle in Medina County, Texas yet. Countywide channels for Medina County that may also cover this area are shown below when we have them. The closest trunked radio site we have is West Simulcast (Alamo Area Regional Radio System (AARRS)), about 16 miles away.

Lytle also extends into Atascosa County, Bexar County.

About Lytle Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lytle: Medina County Fire 155.3025 MHz, P25, NAC 300.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Medina County channels that also cover Lytle

Fire Dispatch

Fire Dispatch frequencies for Medina County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medina County FireFire/EMS Primary – Digital Side155.3025
In 158.8650
NAC 300P25WQYC573
Medina County FireFire/EMS Primary155.3025
In 158.8650
186.2 PLFMNWQYC573
Medina County FireFire/EMS Secondary158.7600
In 154.1000
203.5 PLFMNKVF684

Nearest trunked radio sites

Distances are measured from the center of Lytle.

West Simulcast · Alamo Area Regional Radio System (AARRS)
RFSS 70 · Site 70 (hex 46) · NAC 50 · about 16 mi away
Control 851.25, 851.875, 852.7, 852.9375, 853.1375, 853.4125, 855.0625, 855.4625, 855.6375, 856.2875, 856.9875, 857.3625, 857.4375, 857.9875
Harlandale (South San Antonio) · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 35 (hex 23) · NAC 130 · about 19 mi away
Control 769.76875, 770.29375
Voice 771.09375, 772.36875, 773.14375, 774.91875
NW San Antonio · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 55 (hex 37) · NAC 130 · about 22 mi away
Control 774.06875, 774.53125
Voice 770.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lytle?

We do not have a fire dispatch channel listed specifically for Lytle. The county-level fire dispatch channels in the same county: Medina County Fire 155.3025 MHz, P25, NAC 300.

What scanner do I need to listen to fire and EMS in Lytle?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Lytle?

For Lytle, start with the West Simulcast site of Alamo Area Regional Radio System (AARRS). Its control channels are 851.25, 851.875, 852.7, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.