About Muleshoe Fire and EMS Frequencies
Quick answer: Fire dispatch for Muleshoe: Muleshoe Fire 155.2350 MHz, FM, no tone. County-level ems dispatch that covers Muleshoe: Bailey County EMS 155.5950 MHz, FM, 162.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Muleshoe conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muleshoe Fire | Muleshoe Fire | 155.2350 In 158.8350 | FM | WPVY646 |
Bailey County channels that also cover Muleshoe
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bailey County EMS | Sheriff / EMS / Muleshoe Police | 155.5950 In 156.0300 | 162.2 PL | FM | KNGN702 |
Nearest trunked radio sites
Distances are measured from the center of Muleshoe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Muleshoe?
Fire dispatch channels listed for Muleshoe: Muleshoe Fire 155.2350 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Muleshoe?
We do not have a EMS dispatch channel listed specifically for Muleshoe. The county-level EMS dispatch channels in the same county: Bailey County EMS 155.5950 MHz, FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Muleshoe?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Muleshoe?
For Muleshoe, start with the Abernathy site of Lubbock City-County Mutual Radio System. Its control channels are 856.7375, 858.7375, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Muleshoe fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Muleshoe are marked encrypted.