Skip to content

Jefferson County Fire and EMS Frequencies

Jefferson County in Oregon has 8 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 15 cities and communities below for local fire departments and EMS agencies.

About Jefferson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Jefferson County: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL. EMS dispatch for Jefferson County: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL. Trunked: Oregon State Radio Project, for example Jefferson County Fire talkgroup 9127 (hex 23a7).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jefferson County, start with the Agency Plains site of Oregon State Radio Project. Its control channels: 769.20625, 769.70625, 770.20625 MHz.

Data updated .

Jefferson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireFire/EMS Dispatch154.2500100.0 PLFMNWQRV479
Jefferson County FireJefferson County Fire Dispatch (Digital) Simulcast with Dispatch Analog. TG 1 is Dispatch/Operations, TG 16301 is 1701 Tone out only.154.3625NAC 107P25WQDN279
Jefferson County FireLake Chinook Fire and Rescue154.9950162.2 PLFMNWPYM359

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireFire Operations155.0250NAC 101P25WQDN279
Jefferson County FireFire Operations155.8650NAC 123P25WQDN279

Fire Talk-around

Fire Talk-around frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireOutput UHF link for 154.250 Fire457.1500FMN—

EMS Dispatch

EMS Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County EMSJefferson County EMS – Dispatch155.2800131.8 PLFMNWPGA227

Hospitals & Medical

Hospitals & Medical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County HospitalSt Charles Madras155.3400FMNKNDL424

Jefferson County trunked talkgroups

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Jefferson County FireJefferson Co Fire912723a7T
Jefferson County FireLake Chinook Fire912823a8T
Jefferson County FireCRR FIRE Toneout Station 5019340247cT
Jefferson County FireCRR FIRE Toneout 5PC9341247dT
Jefferson County HospitalSCMC – Madras9070236eT

Radio system sites in Jefferson County

Program the control channel first; your scanner finds the voice channels from it.

Agency Plains · Oregon State Radio Project
RFSS 4 · Site 4 (hex 4) · NAC 004
Control 769.20625, 769.70625, 770.20625, 773.53125, 773.80625
Camp Sherman · Oregon State Radio Project
RFSS 106 · Site 106 (hex 6A) · NAC 06A
Control 857.9875, 858.9875, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jefferson County

Common questions

What frequency does the fire department use in Jefferson County?

Fire dispatch channels listed for Jefferson County: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Jefferson County?

EMS dispatch channels listed for Jefferson County: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Jefferson County?

Yes. Fire and EMS talkgroups are listed for Oregon State Radio Project: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jefferson County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jefferson County?

For Jefferson County, start with the Agency Plains site of Oregon State Radio Project. Its control channels are 769.20625, 769.70625, 770.20625, 773.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Jefferson County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Jefferson County are marked encrypted.

Are Jefferson County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Jefferson County are marked encrypted.