About Grandview Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Grandview: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Grandview: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL. Trunked: Oregon State Radio Project, for example Jefferson County Fire talkgroup 9127 (hex 23a7).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Grandview, start with the Camp Sherman site of Oregon State Radio Project, about 6 miles away. Its control channels: 857.9875, 858.9875, 859.9875 MHz.
Data updated .
Jefferson County channels that also cover Grandview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Fire/EMS Dispatch | 154.2500 | 100.0 PL | FMN | WQRV479 |
| Jefferson County Fire | Jefferson County Fire Dispatch (Digital) Simulcast with Dispatch Analog. TG 1 is Dispatch/Operations, TG 16301 is 1701 Tone out only. | 154.3625 | NAC 107 | P25 | WQDN279 |
| Jefferson County Fire | Lake Chinook Fire and Rescue | 154.9950 | 162.2 PL | FMN | WPYM359 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Fire Operations | 155.0250 | NAC 101 | P25 | WQDN279 |
| Jefferson County Fire | Fire Operations | 155.8650 | NAC 123 | P25 | WQDN279 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Output UHF link for 154.250 Fire | 457.1500 | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County EMS | Jefferson County EMS – Dispatch | 155.2800 | 131.8 PL | FMN | WPGA227 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Hospital | St Charles Madras | 155.3400 | FMN | KNDL424 |
Oregon State Radio Project
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jefferson County Fire | Jefferson Co Fire | 9127 | 23a7 | T |
| Jefferson County Fire | Lake Chinook Fire | 9128 | 23a8 | T |
| Jefferson County Fire | CRR FIRE Toneout Station 501 | 9340 | 247c | T |
| Jefferson County Fire | CRR FIRE Toneout 5PC | 9341 | 247d | T |
| Jefferson County Hospital | SCMC – Madras | 9070 | 236e | T |
Nearest trunked radio sites
Distances are measured from the center of Grandview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Grandview?
We do not have a fire dispatch channel listed specifically for Grandview. The county-level fire dispatch channels in the same county: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Grandview?
We do not have a EMS dispatch channel listed specifically for Grandview. The county-level EMS dispatch channels in the same county: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Grandview?
Yes. The county-level systems that cover Grandview are Fire and EMS talkgroups are listed for Oregon State Radio Project: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Grandview?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Grandview?
For Grandview, start with the Camp Sherman site of Oregon State Radio Project. Its control channels are 857.9875, 858.9875, 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.