Skip to content

Culver Fire and EMS Frequencies

We do not have frequencies listed specifically for Culver in Jefferson County, Oregon yet. Countywide channels for Jefferson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Grizzly (Oregon State Radio Project), about 14 miles away.

About Culver Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Culver: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Culver: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL. Trunked: Oregon State Radio Project, for example Jefferson County Fire talkgroup 9127 (hex 23a7).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Culver, start with the Grizzly site of Oregon State Radio Project, about 14 miles away. Its control channels: 769.41875, 770.45625, 770.70625 MHz.

Data updated .

Jefferson County channels that also cover Culver

Fire Dispatch

Fire Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireFire/EMS Dispatch154.2500100.0 PLFMNWQRV479
Jefferson County FireJefferson County Fire Dispatch (Digital) Simulcast with Dispatch Analog. TG 1 is Dispatch/Operations, TG 16301 is 1701 Tone out only.154.3625NAC 107P25WQDN279
Jefferson County FireLake Chinook Fire and Rescue154.9950162.2 PLFMNWPYM359

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireFire Operations155.0250NAC 101P25WQDN279
Jefferson County FireFire Operations155.8650NAC 123P25WQDN279

Fire Talk-around

Fire Talk-around frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireOutput UHF link for 154.250 Fire457.1500FMN—

EMS Dispatch

EMS Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County EMSJefferson County EMS – Dispatch155.2800131.8 PLFMNWPGA227

Hospitals & Medical

Hospitals & Medical frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County HospitalSt Charles Madras155.3400FMNKNDL424

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Jefferson County FireJefferson Co Fire912723a7T
Jefferson County FireLake Chinook Fire912823a8T
Jefferson County FireCRR FIRE Toneout Station 5019340247cT
Jefferson County FireCRR FIRE Toneout 5PC9341247dT
Jefferson County HospitalSCMC – Madras9070236eT

Nearest trunked radio sites

Distances are measured from the center of Culver.

Grizzly · Oregon State Radio Project
RFSS 17 · Site 17 (hex 11) · NAC 011 · about 14 mi away
Control 769.41875, 770.45625, 770.70625, 773.31875, 774.05625
Agency Plains · Oregon State Radio Project
RFSS 4 · Site 4 (hex 4) · NAC 004 · about 16 mi away
Control 769.20625, 769.70625, 770.20625, 773.53125, 773.80625
Hinkle Butte · Oregon State Radio Project
RFSS 105 · Site 105 (hex 69) · NAC 069 · about 19 mi away
Control 856.2125, 857.2125, 858.2125, 859.2125, 860.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Culver?

We do not have a fire dispatch channel listed specifically for Culver. The county-level fire dispatch channels in the same county: Jefferson County Fire 154.2500 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Culver?

We do not have a EMS dispatch channel listed specifically for Culver. The county-level EMS dispatch channels in the same county: Jefferson County EMS 155.2800 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Culver?

Yes. The county-level systems that cover Culver are Fire and EMS talkgroups are listed for Oregon State Radio Project: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Culver?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Culver?

For Culver, start with the Grizzly site of Oregon State Radio Project. Its control channels are 769.41875, 770.45625, 770.70625, 773.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.