Skip to content

Benton County Fire and EMS Frequencies

Benton County in Oregon has 5 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 22 cities and communities below for local fire departments and EMS agencies.

About Benton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Benton County: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL. Trunked: Oregon State Radio Project, for example Benton County Fire talkgroup 40918 (hex 9fd6).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Benton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireBenton County Fire – Dispatch (Mary's Peak / Vineyard)154.3400
In 156.1950
167.9 PLFMNKOM941
Benton County FireBenton County Fire – Dispatch (Adair Village)154.3400141.3 PLFMN—

EMS Tactical

EMS Tactical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Search and RescueSearch and Rescue153.9125CSQFMN—
Search And RescueSearch And Rescue154.1750100.0 PLFMN—

Hospitals & Medical

Hospitals & Medical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Good Samaritan Regional Medical CenterGood Samaritan Regional Medical Center155.3400167.9 PLFMN—

Benton County trunked talkgroups

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County FireCounty Fire Dispatch409189fd6T

Oregon State University (Project 25)

Project 25

Oregon State University (Project 25) talkgroups
AgencyDescriptionTalkgroupHexMode
Oregon State University (Project 25)Oregon State University (Project 25) – Dispatch – Linked w/ Benton County Fire 154.34044011abebD
Oregon State University (Project 25)FIRE Interop44023abf7D
Oregon State University (Project 25)FIRE Interop44024abf8D

Radio system sites in Benton County

Program the control channel first; your scanner finds the voice channels from it.

Corvallis - Wren Peak · Oregon State Radio Project
RFSS 44 · Site 44 (hex 2C)
Voice 770.96875, 773.03125, 773.58125, 774.31875, 774.78125
Simulcast · Oregon State University (Project 25)
Project 25 · RFSS 88 · Site 96 (hex 60) · NAC 060
Control 858.7125
Voice 858.7375, 858.7625
Benton County Simulcast · SW 7 County Interoperable Public Safety Radio Partnership
RFSS 1 · Site 10 (hex A) · NAC 1F0
Control 774.38125, 774.70625
Voice 770.78125, 771.45625, 771.80625, 772.28125, 772.88125, 773.45625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Benton County

Common questions

What frequency does the fire department use in Benton County?

Fire dispatch channels listed for Benton County: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Benton County?

Yes. Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Benton County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Benton County?

For Benton County, start with the Simulcast site of Oregon State University (Project 25). Its control channels are 858.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Benton County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Benton County are marked encrypted.

Are Benton County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Benton County are marked encrypted.