About Albany Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Albany: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL. Trunked: Oregon State Radio Project, for example Benton County Fire talkgroup 40918 (hex 9fd6).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Albany, start with the Simulcast site of Oregon State University (Project 25), about 10 miles away. Its control channels: 858.7125 MHz.
Data updated .
Benton County channels that also cover Albany
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire | Benton County Fire – Dispatch (Mary's Peak / Vineyard) | 154.3400 In 156.1950 | 167.9 PL | FMN | KOM941 |
| Benton County Fire | Benton County Fire – Dispatch (Adair Village) | 154.3400 | 141.3 PL | FMN | — |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Search and Rescue | Search and Rescue | 153.9125 | CSQ | FMN | — |
| Search And Rescue | Search And Rescue | 154.1750 | 100.0 PL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Good Samaritan Regional Medical Center | Good Samaritan Regional Medical Center | 155.3400 | 167.9 PL | FMN | — |
Oregon State Radio Project
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Benton County Fire | County Fire Dispatch | 40918 | 9fd6 | T |
Oregon State University (Project 25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oregon State University (Project 25) | Oregon State University (Project 25) – Dispatch – Linked w/ Benton County Fire 154.340 | 44011 | abeb | D |
| Oregon State University (Project 25) | FIRE Interop | 44023 | abf7 | D |
| Oregon State University (Project 25) | FIRE Interop | 44024 | abf8 | D |
Nearest trunked radio sites
Distances are measured from the center of Albany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Albany?
We do not have a fire dispatch channel listed specifically for Albany. The county-level fire dispatch channels in the same county: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Albany?
Yes. The county-level systems that cover Albany are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Albany?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Albany?
For Albany, start with the Simulcast site of Oregon State University (Project 25). Its control channels are 858.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.