About Millersburg Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Millersburg: Linn County Fire 155.8500 MHz, narrow FM, 77.0 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Linn County channels that also cover Millersburg
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Fire | Linn County Fire – Dispatch | 155.8500 In 151.1000 | 77.0 PL | FMN | WSAR749 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Fire | Linn County Fire – Working | 154.1300 In 158.9100 | 156.7 PL | FMN | WSAR749 |
| Linn County Fire | Linn County Fire – Tactical Channel – Simplex | 155.5650 In 155.5650 | 167.9 PL | FMN | WNNH454 |
| Linn County Fire | Linn County Fire – Working | 156.1875 In 154.3100 | 100.0 PL | FMN | WRZV756 |
| Linn County Fire | Linn County Fire – Working | 159.1425 In 153.9950 | 123.0 PL | FMN | WRZV756 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Hospital | Albany General Hospital | 155.3400 | 173.8 PL | FMN | — |
| Linn County Hospital | Lebanon Community Hospital | 155.3400 | 131.8 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Millersburg.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Millersburg?
We do not have a fire dispatch channel listed specifically for Millersburg. The county-level fire dispatch channels in the same county: Linn County Fire 155.8500 MHz, narrow FM, 77.0 PL.
What scanner do I need to listen to fire and EMS in Millersburg?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Millersburg?
For Millersburg, start with the Wipper Hill site of Oregon State Radio Project. Its control channels are 769.43125, 769.96875, 770.41875, 773.29375 MHz. Program a control channel first; the scanner finds the voice channels from it.