Skip to content

Alpine Fire and EMS Frequencies

We do not have frequencies listed specifically for Alpine in Benton County, Oregon yet. Countywide channels for Benton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Prairie Peak (SW 7 County Interoperable Public Safety Radio Partnership), about 12 miles away.

About Alpine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Alpine: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL. Trunked: Oregon State Radio Project, for example Benton County Fire talkgroup 40918 (hex 9fd6).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Alpine, start with the Prairie Peak site of SW 7 County Interoperable Public Safety Radio Partnership, about 12 miles away. Its control channels: 851.1625, 851.5375, 852.975 MHz.

Data updated .

Benton County channels that also cover Alpine

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireBenton County Fire – Dispatch (Mary's Peak / Vineyard)154.3400
In 156.1950
167.9 PLFMNKOM941
Benton County FireBenton County Fire – Dispatch (Adair Village)154.3400141.3 PLFMN—

EMS Tactical

EMS Tactical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Search and RescueSearch and Rescue153.9125CSQFMN—
Search And RescueSearch And Rescue154.1750100.0 PLFMN—

Hospitals & Medical

Hospitals & Medical frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Good Samaritan Regional Medical CenterGood Samaritan Regional Medical Center155.3400167.9 PLFMN—

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County FireCounty Fire Dispatch409189fd6T

Oregon State University (Project 25)

Project 25

Oregon State University (Project 25) talkgroups
AgencyDescriptionTalkgroupHexMode
Oregon State University (Project 25)Oregon State University (Project 25) – Dispatch – Linked w/ Benton County Fire 154.34044011abebD
Oregon State University (Project 25)FIRE Interop44023abf7D
Oregon State University (Project 25)FIRE Interop44024abf8D

Nearest trunked radio sites

Distances are measured from the center of Alpine.

Prairie Peak · SW 7 County Interoperable Public Safety Radio Partnership
RFSS 1 · Site 15 (hex F) · NAC 1F0 · about 12 mi away
Control 851.1625, 851.5375, 852.975
Prairie Peak · Oregon State Radio Project
RFSS 25 · Site 25 (hex 19) · NAC 019 · about 12 mi away
Control 769.18125, 769.44375, 770.44375, 774.80625
Benton County Simulcast · SW 7 County Interoperable Public Safety Radio Partnership
RFSS 1 · Site 10 (hex A) · NAC 1F0 · about 12 mi away
Control 774.38125, 774.70625
Voice 770.78125, 771.45625, 771.80625, 772.28125, 772.88125, 773.45625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alpine?

We do not have a fire dispatch channel listed specifically for Alpine. The county-level fire dispatch channels in the same county: Benton County Fire 154.3400 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Alpine?

Yes. The county-level systems that cover Alpine are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup; Oregon State University (Project 25) (Project 25): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Alpine?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Alpine?

For Alpine, start with the Prairie Peak site of SW 7 County Interoperable Public Safety Radio Partnership. Its control channels are 851.1625, 851.5375, 852.975 MHz. Program a control channel first; the scanner finds the voice channels from it.