About Glencoe Fire and EMS Frequencies
Quick answer: Fire dispatch for Glencoe: Glencoe Fire 156.2100 MHz, narrow FM, 261 DPL. County-level ems dispatch that covers Glencoe: Air Evac Medical Helicopters 159.5250 MHz, narrow FM, 261 DPL; Payne County EMS 150.8300 MHz, narrow FM, 103.5 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Glencoe Fire talkgroup 303 (hex 12f).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Glencoe, start with the Payne County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 11 miles away. Its control channels: 774.34375, 774.59375, 774.84375 MHz.
Data updated .
Glencoe conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Glencoe Fire | Glencoe Tri-County-Fire Dispatch | 156.2100 In 153.8450 | 261 DPL | FMN | WQRA440 |
Glencoe trunked talkgroups
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Glencoe Fire | Glencoe Fire Dispatch | 303 | 12f | T |
Payne County channels that also cover Glencoe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Payne County Fire | Payne County Fire – Dispatch – West (Stillwater) | 154.3175 In 151.4375 | 432 DPL | FMN | WQMR334 |
| Payne County Fire | Payne County Fire – Dispatch – East (Cushing) | 159.4050 In 151.2125 | 732 DPL | FMN | WQMR334 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopters | Air Evac -- Stillwater Base | 159.5250 | 261 DPL | FMN | WQRJ444 |
| Payne County EMS | LifeNet Ambulance Dispatch | 150.8300 In 159.7500 | 103.5 PL | FMN | WQNP729 |
Nearest trunked radio sites
Distances are measured from the center of Glencoe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Glencoe?
Fire dispatch channels listed for Glencoe: Glencoe Fire 156.2100 MHz, narrow FM, 261 DPL.
What frequency does EMS or the ambulance service use in Glencoe?
We do not have a EMS dispatch channel listed specifically for Glencoe. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 159.5250 MHz, narrow FM, 261 DPL; Payne County EMS 150.8300 MHz, narrow FM, 103.5 PL.
Do fire departments and EMS use a trunked radio system in Glencoe?
Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Glencoe?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Glencoe?
For Glencoe, start with the Payne County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 774.34375, 774.59375, 774.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Glencoe fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Glencoe are marked encrypted.
Are Glencoe fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Glencoe are marked encrypted.