Skip to content

Sumner Fire and EMS Frequencies

We do not have frequencies listed specifically for Sumner in Noble County, Oklahoma yet. Countywide channels for Noble County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Payne County (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 19 miles away.

About Sumner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sumner: Noble County Fire 151.3475 MHz, narrow FM, 156.7 PL. Trunked: Oklahoma Multi-Agency Communications System (OMACS), for example Noble County Fire talkgroup 1723 (hex 6bb).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sumner, start with the Payne County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 19 miles away. Its control channels: 774.34375, 774.59375, 774.84375 MHz.

Data updated .

Noble County channels that also cover Sumner

Fire Dispatch

Fire Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Noble County FireCounty / Perry Fire and EMS Dispatch151.3475
In 159.3300
156.7 PLFMNWQMB475
Noble County Fire OldCounty Fire Net152.2100025 DPLFMN—

Oklahoma Multi-Agency Communications System (OMACS)

Oklahoma Multi-Agency Communications System (OMACS) talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County FireNoble County Fire – Dispatch17236bbD

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County FireNoble County Fire – Dispatch17236bbD
Noble County FireNoble County Fire – Tactical Channel9533b9D

Nearest trunked radio sites

Distances are measured from the center of Sumner.

Payne County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 49 (hex 31) · NAC 920 · about 19 mi away
Control 774.34375, 774.59375, 774.84375
Voice 773.59375, 773.84375, 774.09375
Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 31 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
Carney · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 4 (hex 4) · NAC 92C · about 35 mi away
Control 859.7125, 860.7125
Voice 852.2, 852.95, 856.7125, 857.7125, 858.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sumner?

We do not have a fire dispatch channel listed specifically for Sumner. The county-level fire dispatch channels in the same county: Noble County Fire 151.3475 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Sumner?

Yes. The county-level systems that cover Sumner are Fire and EMS talkgroups are listed for Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sumner?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sumner?

For Sumner, start with the Payne County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 774.34375, 774.59375, 774.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.