Skip to content

Skedee Fire and EMS Frequencies

We do not have frequencies listed specifically for Skedee in Pawnee County, Oklahoma yet. Countywide channels for Pawnee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hominy (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 12 miles away.

About Skedee Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Skedee: Pawnee County Fire 154.3925 MHz, narrow FM, 167.9 PL; Rural Fire Districts 154.2650 MHz, narrow FM, 123.0 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Pawnee County channels that also cover Skedee

Fire Dispatch

Fire Dispatch frequencies for Pawnee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pawnee County FirePawnee County Fire – Dispatch154.3925
In 158.7450
167.9 PLFMNKKZ996
Rural Fire DistrictsBasin Fire (near Mannford)154.2650123.0 PLFMNWPHX216
Rural Fire DistrictsNorth 48 Fire Dispatch154.2650
In 158.9400
CC 3 · TG * · SL *DMRWPHX216
Rural Fire DistrictsPeninsula Fire154.4300
In 150.8050
167.9 PLFMNKNFQ448

Nearest trunked radio sites

Distances are measured from the center of Skedee.

Hominy · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 69 (hex 45) · NAC 92E · about 12 mi away
Control 853.6625, 853.9125
Voice 851.0375, 851.35, 851.5625, 852.0375, 852.475, 852.95
Payne County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 49 (hex 31) · NAC 920 · about 26 mi away
Control 774.34375, 774.59375, 774.84375
Voice 773.59375, 773.84375, 774.09375
Drumright · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 66 (hex 42) · about 28 mi away
Control 852.775
Voice 851.225, 851.75, 853.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Skedee?

We do not have a fire dispatch channel listed specifically for Skedee. The county-level fire dispatch channels in the same county: Pawnee County Fire 154.3925 MHz, narrow FM, 167.9 PL; Rural Fire Districts 154.2650 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Skedee?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Skedee?

For Skedee, start with the Hominy site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.6625, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.