About Pinebluff Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pinebluff: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL. Trunked: North Carolina VIPER, for example Moore County Fire talkgroup 32006 (hex 7d06).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pinebluff, start with the Southern Pines site of North Carolina VIPER, about 6 miles away. Its control channels: 773.15625, 774.18125 MHz.
Data updated .
Moore County channels that also cover Pinebluff
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moore County Fire | Fire/EMS Dispatch | 453.1500 In 458.1500 | 123.0 PL | FMN | KNGA952 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Moore County Fire | Moore County Fire – Dispatch | 32006 | 7d06 | D |
| Moore County Fire | Fire Administration | 32005 | 7d05 | D |
| Moore County EMS | Moore County EMS – Dispatch | 32002 | 7d02 | D |
| Moore County EMS | EMS Administration | 32003 | 7d03 | D |
Nearest trunked radio sites
Distances are measured from the center of Pinebluff.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pinebluff?
We do not have a fire dispatch channel listed specifically for Pinebluff. The county-level fire dispatch channels in the same county: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Pinebluff?
Yes. The county-level systems that cover Pinebluff are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pinebluff?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pinebluff?
For Pinebluff, start with the Southern Pines site of North Carolina VIPER. Its control channels are 773.15625, 774.18125 MHz. Program a control channel first; the scanner finds the voice channels from it.