About Five Points Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Five Points: Hoke County Fire 154.4000 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Five Points: Hoke County EMS 154.7850 MHz, narrow FM, 85.4 PL. Trunked: North Carolina VIPER, for example Hoke County Fire talkgroup 24003 (hex 5dc3).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Five Points, start with the McCain Hospital site of North Carolina VIPER, about 3 miles away. Its control channels: 858.2375, 859.2375 MHz.
Data updated .
Hoke County channels that also cover Five Points
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hoke County Fire | Hoke County Fire – Dispatch | 154.4000 | 127.3 PL | FMN | KLV959 |
| Hoke County Fire | State Rescue | 155.2800 | 85.4 PL | FM | WNNO667 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hoke County EMS | Hoke County EMS – Dispatch | 154.7850 | 85.4 PL | FMN | KVZ728 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hoke County Hospital | EMS to Moore Regional Hospital (Hoke Campus) | 155.3400 | 85.4 PL | FMN | WQSE951 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hoke County Fire | Hoke County Fire – Dispatch | 24003 | 5dc3 | D |
| Hoke County Fire | County Tactical | 24010 | 5dca | D |
| Hoke County Fire | County Tactical | 24011 | 5dcb | D |
| Hoke County Fire | County Tactical | 24012 | 5dcc | D |
| Hoke County EMS | Hoke County EMS – Dispatch | 24002 | 5dc2 | D |
Nearest trunked radio sites
Distances are measured from the center of Five Points.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Five Points?
We do not have a fire dispatch channel listed specifically for Five Points. The county-level fire dispatch channels in the same county: Hoke County Fire 154.4000 MHz, narrow FM, 127.3 PL.
What frequency does EMS or the ambulance service use in Five Points?
We do not have a EMS dispatch channel listed specifically for Five Points. The county-level EMS dispatch channels in the same county: Hoke County EMS 154.7850 MHz, narrow FM, 85.4 PL.
Do fire departments and EMS use a trunked radio system in Five Points?
Yes. The county-level systems that cover Five Points are Fire and EMS talkgroups are listed for North Carolina VIPER: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Five Points?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Five Points?
For Five Points, start with the McCain Hospital site of North Carolina VIPER. Its control channels are 858.2375, 859.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.