Skip to content

Pinehurst Fire and EMS Frequencies

We do not have frequencies listed specifically for Pinehurst in Moore County, North Carolina yet. Countywide channels for Moore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Southern Pines (North Carolina VIPER), about 3 miles away.

About Pinehurst Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pinehurst: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL. Trunked: North Carolina VIPER, for example Moore County Fire talkgroup 32006 (hex 7d06).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pinehurst, start with the Southern Pines site of North Carolina VIPER, about 3 miles away. Its control channels: 773.15625, 774.18125 MHz.

Data updated .

Moore County channels that also cover Pinehurst

Fire Dispatch

Fire Dispatch frequencies for Moore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Moore County FireFire/EMS Dispatch453.1500
In 458.1500
123.0 PLFMNKNGA952

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Moore County FireMoore County Fire – Dispatch320067d06D
Moore County FireFire Administration320057d05D
Moore County EMSMoore County EMS – Dispatch320027d02D
Moore County EMSEMS Administration320037d03D

Nearest trunked radio sites

Distances are measured from the center of Pinehurst.

Southern Pines · North Carolina VIPER
RFSS 1 · Site 54 (hex 36) · NAC 1F0 · about 3 mi away
Control 773.15625, 774.18125
Voice 769.25625, 769.78125, 771.38125, 771.63125, 772.23125, 772.85625
McCain Hospital · North Carolina VIPER
RFSS 1 · Site 33 (hex 21) · NAC 1F1 · about 12 mi away
Control 858.2375, 859.2375
Voice 851.1125, 851.4, 851.9125, 852.3125, 853.85, 857.2375
Carthage · North Carolina VIPER
RFSS 1 · Site 11 (hex B) · NAC 1F0 · about 12 mi away
Control 853.675, 855.5375
Voice 851.275, 851.6, 851.975, 852.55, 852.95, 853.1125, 853.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pinehurst?

We do not have a fire dispatch channel listed specifically for Pinehurst. The county-level fire dispatch channels in the same county: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Pinehurst?

Yes. The county-level systems that cover Pinehurst are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pinehurst?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pinehurst?

For Pinehurst, start with the Southern Pines site of North Carolina VIPER. Its control channels are 773.15625, 774.18125 MHz. Program a control channel first; the scanner finds the voice channels from it.