Skip to content

Moore County Fire and EMS Frequencies

Moore County in North Carolina has 1 countywide conventional frequency and 4 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Moore County Fire and EMS Frequencies

Quick answer: Fire dispatch for Moore County: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL. Trunked: North Carolina VIPER, for example Moore County Fire talkgroup 32006 (hex 7d06).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Moore County, start with the Carthage site of North Carolina VIPER. Its control channels: 853.675, 855.5375 MHz.

Data updated .

Moore County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Moore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Moore County FireFire/EMS Dispatch453.1500
In 458.1500
123.0 PLFMNKNGA952

Moore County trunked talkgroups

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Moore County FireMoore County Fire – Dispatch320067d06D
Moore County FireFire Administration320057d05D
Moore County EMSMoore County EMS – Dispatch320027d02D
Moore County EMSEMS Administration320037d03D

Radio system sites in Moore County

Program the control channel first; your scanner finds the voice channels from it.

Carthage · North Carolina VIPER
RFSS 1 · Site 11 (hex B) · NAC 1F0
Control 853.675, 855.5375
Voice 851.275, 851.6, 851.975, 852.55, 852.95, 853.1125, 853.325
Southern Pines · North Carolina VIPER
RFSS 1 · Site 54 (hex 36) · NAC 1F0
Control 773.15625, 774.18125
Voice 769.25625, 769.78125, 771.38125, 771.63125, 772.23125, 772.85625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Moore County

Common questions

What frequency does the fire department use in Moore County?

Fire dispatch channels listed for Moore County: Moore County Fire 453.1500 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Moore County?

Yes. Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Moore County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Moore County?

For Moore County, start with the Carthage site of North Carolina VIPER. Its control channels are 853.675, 855.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Moore County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Moore County are marked encrypted.

Are Moore County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Moore County are marked encrypted.