About Scotts Bluff County Fire and EMS Frequencies
Quick answer: Fire dispatch for Scotts Bluff County: Rural Fire Paging 155.1300 MHz, narrow FM, no tone; Scotts Bluff County Fire 152.4800 MHz, narrow FM, no tone. EMS dispatch for Scotts Bluff County: Scotts Bluff County EMS 461.9000 MHz, narrow FM, 110.9 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25, DMR), which needs a scanner that decodes those modes.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Scotts Bluff County, start with the Scottsbluff site of Nebraska State Radio System. Its control channels: 856.4875, 856.7625, 857.0375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Scotts Bluff County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire Paging | Rural Fire Paging | 155.1300 | FMN | WQZU822 | |
| Scotts Bluff County Fire | Fire Paging | 152.4800 | FMN | WNSG365 | |
| Scotts Bluff County Fire | Scotts Bluff County Fire – VHF | 154.4450 In 153.8900 | CSQ | FMN | WNFU718 |
| Scotts Bluff County Fire | Scotts Bluff County Fire – Dispatch (remote RF link) | 452.1000 | 141.3 PL | FMN | KAI875 |
| Scotts Bluff County Fire | Scottsbluff Rural/Mitchell/Minetatre Fire Department's | 453.3750 In 458.3750 | FMN | WQCL679 | |
| Scotts Bluff County Fire | Scotts Bluff County Fire – 800 | 860.4875 In 815.4875 | NAC 156 | P25 | WPKU672 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County Fire | Fire Talkaround | 854.9875 In 809.9875 | FMN | WPWM264 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County EMS | Dispatch.9 | 461.9000 | 110.9 PL | FMN | — |
| Scotts Bluff County EMS | Dispatch.8 | 461.9000 | 114.8 PL | FMN | — |
| Scotts Bluff County EMS | Dispatch.9 | 461.9000 | 71.9 PL | FMN | — |
| Scotts Bluff County EMS | Scotts Bluff County EMS – Dispatch | 462.9750 In 467.9750 | 114.8 PL | FMN | WPIS314 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County EMS | Scotts Bluff County EMS – Tactical Channel | 460.5500 In 465.5500 | CC 4 · TG 1 · SL 1 | DMR | WQSX464 |
| Scotts Bluff County EMS | Scotts Bluff County EMS – Tactical Channel | 463.1875 In 468.1875 | CC 3 · TG 1 · SL 1 | DMR | WQAS946 |
Scotts Bluff County trunked talkgroups
Nebraska State Radio System
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scotts Bluff County Fire | Scotts Bluff County Fire – Dispatch | 52117 | cb95 | T Encrypted |
Radio system sites in Scotts Bluff County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Scotts Bluff County
Common questions
What frequency does the fire department use in Scotts Bluff County?
Fire dispatch channels listed for Scotts Bluff County: Rural Fire Paging 155.1300 MHz, narrow FM, no tone; Scotts Bluff County Fire 152.4800 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Scotts Bluff County?
EMS dispatch channels listed for Scotts Bluff County: Scotts Bluff County EMS 461.9000 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Scotts Bluff County?
Yes. Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Scotts Bluff County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Scotts Bluff County?
For Scotts Bluff County, start with the Scottsbluff site of Nebraska State Radio System. Its control channels are 856.4875, 856.7625, 857.0375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Scotts Bluff County fire and EMS frequencies encrypted?
None of the 13 conventional frequencies listed for Scotts Bluff County are marked encrypted.
Are Scotts Bluff County fire and EMS talkgroups encrypted?
1 of the 1 talkgroups listed for Scotts Bluff County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.