About Morrill Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Morrill: Rural Fire Paging 155.1300 MHz, narrow FM, no tone; Scotts Bluff County Fire 152.4800 MHz, narrow FM, no tone. County-level ems dispatch that covers Morrill: Scotts Bluff County EMS 461.9000 MHz, narrow FM, 110.9 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25, DMR), which needs a scanner that decodes those modes.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Morrill, start with the Mitchell 800 site of Nebraska State Radio System, about 10 miles away. Its control channels: 859.4375, 859.7125, 859.9875 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Scotts Bluff County channels that also cover Morrill
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire Paging | Rural Fire Paging | 155.1300 | FMN | WQZU822 | |
| Scotts Bluff County Fire | Fire Paging | 152.4800 | FMN | WNSG365 | |
| Scotts Bluff County Fire | Scotts Bluff County Fire – VHF | 154.4450 In 153.8900 | CSQ | FMN | WNFU718 |
| Scotts Bluff County Fire | Scotts Bluff County Fire – Dispatch (remote RF link) | 452.1000 | 141.3 PL | FMN | KAI875 |
| Scotts Bluff County Fire | Scottsbluff Rural/Mitchell/Minetatre Fire Department's | 453.3750 In 458.3750 | FMN | WQCL679 | |
| Scotts Bluff County Fire | Scotts Bluff County Fire – 800 | 860.4875 In 815.4875 | NAC 156 | P25 | WPKU672 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County Fire | Fire Talkaround | 854.9875 In 809.9875 | FMN | WPWM264 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County EMS | Dispatch.9 | 461.9000 | 110.9 PL | FMN | — |
| Scotts Bluff County EMS | Dispatch.8 | 461.9000 | 114.8 PL | FMN | — |
| Scotts Bluff County EMS | Dispatch.9 | 461.9000 | 71.9 PL | FMN | — |
| Scotts Bluff County EMS | Scotts Bluff County EMS – Dispatch | 462.9750 In 467.9750 | 114.8 PL | FMN | WPIS314 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scotts Bluff County EMS | Scotts Bluff County EMS – Tactical Channel | 460.5500 In 465.5500 | CC 4 · TG 1 · SL 1 | DMR | WQSX464 |
| Scotts Bluff County EMS | Scotts Bluff County EMS – Tactical Channel | 463.1875 In 468.1875 | CC 3 · TG 1 · SL 1 | DMR | WQAS946 |
Nebraska State Radio System
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scotts Bluff County Fire | Scotts Bluff County Fire – Dispatch | 52117 | cb95 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Morrill.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Morrill?
We do not have a fire dispatch channel listed specifically for Morrill. The county-level fire dispatch channels in the same county: Rural Fire Paging 155.1300 MHz, narrow FM, no tone; Scotts Bluff County Fire 152.4800 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Morrill?
We do not have a EMS dispatch channel listed specifically for Morrill. The county-level EMS dispatch channels in the same county: Scotts Bluff County EMS 461.9000 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Morrill?
Yes. The county-level systems that cover Morrill are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Morrill?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Morrill?
For Morrill, start with the Mitchell 800 site of Nebraska State Radio System. Its control channels are 859.4375, 859.7125, 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.