About Wright County Fire and EMS Frequencies
Quick answer: Fire dispatch for Wright County: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wright County Fire talkgroup 25300 (hex 62d4).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wright County, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.475, 851.85 MHz.
Data updated .
Wright County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wright County Fire | Fire Paging | 154.3250 | CSQ | FMN | WGI966 |
Wright County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Fire | County Fire | 25300 | 62d4 | D |
| Wright County Fire | County Fire Tactical | 25302 | 62d6 | D |
| Wright County Fire | County Fire Tactical | 25303 | 62d7 | D |
| Wright County Fire | County Fire Tactical | 25304 | 62d8 | D |
| Wright County Fire | County Fire Tactical | 25305 | 62d9 | D |
| Wright County Fire | County Fire Tactical | 25306 | 62da | D |
| Wright County Fire | County Fire Tactical | 25307 | 62db | D |
| Wright County Fire | County Fire Tactical | 25308 | 62dc | D |
| Wright County Fire | County Fire Tactical | 25309 | 62dd | D |
| Wright County EMS | County EMS | 25357 | 630d | D |
| Wright County EMS | County EMS | 25358 | 630e | D |
Radio system sites in Wright County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wright County
Common questions
What frequency does the fire department use in Wright County?
Fire dispatch channels listed for Wright County: Wright County Fire 154.3250 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Wright County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wright County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wright County?
For Wright County, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.475, 851.85 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wright County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Wright County are marked encrypted.
Are Wright County fire and EMS talkgroups encrypted?
None of the 11 talkgroups listed for Wright County are marked encrypted.