Skip to content

Albertville Fire and EMS Frequencies

Albertville in Wright County, Minnesota has 0 conventional frequencies and 3 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Sherburne - Wright Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Albertville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Albertville: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Albertville Fire talkgroup 25310 (hex 62de).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Albertville, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 851.475, 851.85 MHz.

Data updated .

Albertville trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Albertville FireAlbertville Fire2531062deD
Albertville FireAlbertville Fire2531162dfD
Albertville FireAlbertville Fire2531262e0D

Wright County channels that also cover Albertville

Fire Dispatch

Fire Dispatch frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County FireFire Paging154.3250CSQFMNWGI966

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Wright County FireCounty Fire2530062d4D
Wright County FireCounty Fire Tactical2530262d6D
Wright County FireCounty Fire Tactical2530362d7D
Wright County FireCounty Fire Tactical2530462d8D
Wright County FireCounty Fire Tactical2530562d9D
Wright County FireCounty Fire Tactical2530662daD
Wright County FireCounty Fire Tactical2530762dbD
Wright County FireCounty Fire Tactical2530862dcD
Wright County FireCounty Fire Tactical2530962ddD
Wright County EMSCounty EMS25357630dD
Wright County EMSCounty EMS25358630eD

Nearest trunked radio sites

Distances are measured from the center of Albertville.

Sherburne - Wright Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 40 (hex 28) · NAC 40F · about 9 mi away
Control 851.475, 851.85
Voice 851.175, 851.275, 851.575, 852.325, 852.775, 852.9, 853.175, 853.575, 858.3625
Hennepin Co. West Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 2 (hex 2) · NAC 40E · about 14 mi away
Control 852.2625, 852.6125, 853.6375, 853.8875
Voice 851.4125, 851.9125, 851.9625, 852.4125, 852.8625, 852.9125, 853.4125, 854.4125, 856.7125, 857.7125, 858.2125, 859.7125
Anoka Co Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 1 · Site 2 (hex 2) · NAC 402 · about 18 mi away
Control 851.9375, 852.3875, 852.8875, 853.3875
Voice 851.1375, 851.3125, 851.3875, 851.6875, 852.0625, 852.2125, 852.8125, 853.0875, 853.1375, 853.6875, 853.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Albertville?

We do not have a fire dispatch channel listed specifically for Albertville. The county-level fire dispatch channels in the same county: Wright County Fire 154.3250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Albertville?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Albertville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Albertville?

For Albertville, start with the Sherburne - Wright Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.475, 851.85 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Albertville fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Albertville are marked encrypted.