About Montrose Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Montrose: Wright County Fire 154.3250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Montrose Fire talkgroup 25342 (hex 62fe).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Montrose, start with the Hennepin Co. West Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 17 miles away. Its control channels: 852.2625, 852.6125, 853.6375 MHz.
Data updated .
Montrose trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montrose Fire | Montrose Fire | 25342 | 62fe | D |
| Montrose Fire | Montrose Fire | 25343 | 62ff | D |
| Montrose Fire | Montrose Fire | 25344 | 6300 | D |
Wright County channels that also cover Montrose
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wright County Fire | Fire Paging | 154.3250 | CSQ | FMN | WGI966 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Fire | County Fire | 25300 | 62d4 | D |
| Wright County Fire | County Fire Tactical | 25302 | 62d6 | D |
| Wright County Fire | County Fire Tactical | 25303 | 62d7 | D |
| Wright County Fire | County Fire Tactical | 25304 | 62d8 | D |
| Wright County Fire | County Fire Tactical | 25305 | 62d9 | D |
| Wright County Fire | County Fire Tactical | 25306 | 62da | D |
| Wright County Fire | County Fire Tactical | 25307 | 62db | D |
| Wright County Fire | County Fire Tactical | 25308 | 62dc | D |
| Wright County Fire | County Fire Tactical | 25309 | 62dd | D |
| Wright County EMS | County EMS | 25357 | 630d | D |
| Wright County EMS | County EMS | 25358 | 630e | D |
Nearest trunked radio sites
Distances are measured from the center of Montrose.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Montrose?
We do not have a fire dispatch channel listed specifically for Montrose. The county-level fire dispatch channels in the same county: Wright County Fire 154.3250 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Montrose?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Montrose?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Montrose?
For Montrose, start with the Hennepin Co. West Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.2625, 852.6125, 853.6375, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Montrose fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Montrose are marked encrypted.