Skip to content

Williamstown Fire and EMS Frequencies

Williamstown in Grant County, Kentucky has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Walton (KY SERVS), about 16 miles away.

About Williamstown Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Williamstown: Grant County Fire 155.1000 MHz, P25, NAC 089. County-level ems dispatch that covers Williamstown: Grant County EMS 154.1000 MHz, narrow FM, 77.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Grant County Fire talkgroup 10274 (hex 2822).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Williamstown, start with the Walton site of KY SERVS, about 16 miles away. Its control channels: 774.89375 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Williamstown conventional frequencies

Fire Talk-around

Fire Talk-around frequencies for Williamstown
AgencyDescriptionFrequency (MHz)ToneModeFCC
Williamstown FireWilliamstown Fire – Alternate154.0700FMKGX994
Williamstown FireNorthern Kentucky Mutual Aid154.2800192.8 PLFMKGX994
Williamstown FireWilliamstown Fire – Alternate154.3550192.8 PLFMNKGX994

Grant County channels that also cover Williamstown

Fire Dispatch

Fire Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FireFire Operations155.1000
In 153.8450
NAC 089P25KIV332
Grant County FireFire Tone Out (Traffic moves to P25)155.9250
In 153.9950
192.8 PLFMWPPC266
Grant County FireGrant County Fire – Dispatch155.9250
In 153.9950
NAC 087P25WPPC266

EMS Dispatch

EMS Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County EMSGrant County EMS – Dispatch154.1000
In 158.9250
77.0 PLFMNWPMN421

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Grant County FireGrant County Fire – Dispatch102742822D
Grant County FireGrant County Fire – Operations102782826D
Grant County FireMarion Fire – Dispatch10285282dD
Grant County FireGrant County Fire – Operations102792827D
Grant County EMSGrant County EMS – Dispatch102772825D
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Grant County EMSGrant County EMS – Operations102762824D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Williamstown.

Walton · KY SERVS
RFSS 3 · Site 43 (hex 2B) · NAC 9C3 · about 16 mi away
Control 774.89375
Voice 772.43125, 772.65625, 773.16875
Kenton County · Northern Kentucky Regional Communications System (NKYRCS)
RFSS 1 · Site 2 (hex 2) · NAC 972 · about 20 mi away
Control 770.61875, 771.26875, 773.40625, 774.15625, 774.63125
Scott County Simulcast · Bluegrass Regional Radio Network (BRRN)
RFSS 10 · Site 10 (hex A) · NAC 00A · about 23 mi away
Control 854.1125, 855.8875, 856.1375, 856.7125, 856.8875, 857.1375, 857.7125, 857.9625, 858.0375, 858.4625, 858.9625, 859.4625, 859.8625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Williamstown?

We do not have a fire dispatch channel listed specifically for Williamstown. The county-level fire dispatch channels in the same county: Grant County Fire 155.1000 MHz, P25, NAC 089.

What frequency does EMS or the ambulance service use in Williamstown?

We do not have a EMS dispatch channel listed specifically for Williamstown. The county-level EMS dispatch channels in the same county: Grant County EMS 154.1000 MHz, narrow FM, 77.0 PL.

Do fire departments and EMS use a trunked radio system in Williamstown?

Yes. The county-level systems that cover Williamstown are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Williamstown?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Williamstown?

For Williamstown, start with the Walton site of KY SERVS. Its control channels are 774.89375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Williamstown fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Williamstown are marked encrypted.