Corinth also extends into Scott County.
About Corinth Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Corinth: Grant County Fire 155.1000 MHz, P25, NAC 089. County-level ems dispatch that covers Corinth: Grant County EMS 154.1000 MHz, narrow FM, 77.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Grant County Fire talkgroup 10274 (hex 2822).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Corinth, start with the Scott County Simulcast site of Bluegrass Regional Radio Network (BRRN), about 14 miles away. Its control channels: 854.1125, 855.8875, 856.1375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Grant County channels that also cover Corinth
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grant County Fire | Fire Operations | 155.1000 In 153.8450 | NAC 089 | P25 | KIV332 |
| Grant County Fire | Fire Tone Out (Traffic moves to P25) | 155.9250 In 153.9950 | 192.8 PL | FM | WPPC266 |
| Grant County Fire | Grant County Fire – Dispatch | 155.9250 In 153.9950 | NAC 087 | P25 | WPPC266 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grant County EMS | Grant County EMS – Dispatch | 154.1000 In 158.9250 | 77.0 PL | FMN | WPMN421 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grant County Fire | Grant County Fire – Dispatch | 10274 | 2822 | D |
| Grant County Fire | Grant County Fire – Operations | 10278 | 2826 | D |
| Grant County Fire | Marion Fire – Dispatch | 10285 | 282d | D |
| Grant County Fire | Grant County Fire – Operations | 10279 | 2827 | D |
| Grant County EMS | Grant County EMS – Dispatch | 10277 | 2825 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grant County EMS | Grant County EMS – Operations | 10276 | 2824 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Corinth.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Corinth?
We do not have a fire dispatch channel listed specifically for Corinth. The county-level fire dispatch channels in the same county: Grant County Fire 155.1000 MHz, P25, NAC 089.
What frequency does EMS or the ambulance service use in Corinth?
We do not have a EMS dispatch channel listed specifically for Corinth. The county-level EMS dispatch channels in the same county: Grant County EMS 154.1000 MHz, narrow FM, 77.0 PL.
Do fire departments and EMS use a trunked radio system in Corinth?
Yes. The county-level systems that cover Corinth are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Corinth?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Corinth?
For Corinth, start with the Scott County Simulcast site of Bluegrass Regional Radio Network (BRRN). Its control channels are 854.1125, 855.8875, 856.1375, 856.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.