About Butler Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Butler: Pendleton County Fire 154.1750 MHz, FM, 167.9 PL. County-level ems dispatch that covers Butler: Pendleton County EMS 159.4200 MHz, FM, 206.5 PL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Butler conventional frequencies
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butler Fire | Butler Fire – Alternate | 151.0100 | 67.0 PL | FM | WPNV495 |
| Butler Fire | Butler Fire – Alternate | 158.9850 | FM | WPNV495 |
Pendleton County channels that also cover Butler
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pendleton County Fire | Pendleton County Fire – Dispatch | 154.1750 In 150.7900 | 167.9 PL | FM | KGM315 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| North Pendleton Fire | North Pendleton Fire | 154.1750 | 210.7 PL | FM | KGM315 |
| Pendleton County Fire | Pendleton County Fire – Alternate | 153.7700 | FM | KGM315 | |
| Pendleton County Fire | Pendleton County Fire – Alternate | 154.2800 | FM | KGM315 | |
| Pendleton County Fire | Pendleton County Fire – Alternate | 159.2325 | FM | WPRX533 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pendleton County EMS | Pendleton County EMS – Dispatch | 159.4200 In 153.9350 | 206.5 PL | FM | WPRF615 |
Nearest trunked radio sites
Distances are measured from the center of Butler.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Butler?
We do not have a fire dispatch channel listed specifically for Butler. The county-level fire dispatch channels in the same county: Pendleton County Fire 154.1750 MHz, FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Butler?
We do not have a EMS dispatch channel listed specifically for Butler. The county-level EMS dispatch channels in the same county: Pendleton County EMS 159.4200 MHz, FM, 206.5 PL.
What scanner do I need to listen to fire and EMS in Butler?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Butler?
For Butler, start with the Campbell County site of Northern Kentucky Regional Communications System (NKYRCS). Its control channels are 772.55625, 772.81875, 774.43125, 774.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Butler fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Butler are marked encrypted.