Skip to content

Thomas County Fire and EMS Frequencies

Thomas County in Kansas has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Thomas County Fire and EMS Frequencies

Quick answer: EMS dispatch for Thomas County: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Thomas County EMS talkgroup 4461 (hex 116d).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Thomas County, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.

Data updated .

Thomas County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Thomas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Thomas County EMSThomas County EMS – Dispatch (before KSICS)462.9500
In 467.9500
192.8 PLFMNKNBJ887

Thomas County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Thomas County EMSCounty EMS Dispatch4461116dD

Radio system sites in Thomas County

Program the control channel first; your scanner finds the voice channels from it.

Halford · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 36 (hex 24) · NAC 1B5
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Colby · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 59 (hex 3B) · NAC 1B1
Control 857.4625, 857.9625
Voice 856.4625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Thomas County

Common questions

What frequency does EMS or the ambulance service use in Thomas County?

EMS dispatch channels listed for Thomas County: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Thomas County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Thomas County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Thomas County?

For Thomas County, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Thomas County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Thomas County are marked encrypted.

Are Thomas County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Thomas County are marked encrypted.