About Rexford Fire and EMS Frequencies
Quick answer: Fire dispatch for Rexford: Rexford Fire 154.2200 MHz, narrow FM, 162.2 PL. County-level ems dispatch that covers Rexford: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Thomas County EMS talkgroup 4461 (hex 116d).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rexford, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 852.2375, 852.9 MHz.
Data updated .
Rexford conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rexford Fire | Rexford Fire – Dispatch | 154.2200 In 158.8200 | 162.2 PL | FMN | WPWX870 |
Thomas County channels that also cover Rexford
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County EMS | Thomas County EMS – Dispatch (before KSICS) | 462.9500 In 467.9500 | 192.8 PL | FMN | KNBJ887 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Thomas County EMS | County EMS Dispatch | 4461 | 116d | D |
Nearest trunked radio sites
Distances are measured from the center of Rexford.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rexford?
Fire dispatch channels listed for Rexford: Rexford Fire 154.2200 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Rexford?
We do not have a EMS dispatch channel listed specifically for Rexford. The county-level EMS dispatch channels in the same county: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Rexford?
Yes. The county-level systems that cover Rexford are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rexford?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rexford?
For Rexford, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Rexford fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Rexford are marked encrypted.