Skip to content

Colby Fire and EMS Frequencies

Colby in Thomas County, Kansas has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Colby (Kansas Statewide Interoperable Communication System (KSICS)), about 0 miles away.

About Colby Fire and EMS Frequencies

Quick answer: Fire dispatch for Colby: Colby Fire 155.9400 MHz, narrow FM, 432 DPL. County-level ems dispatch that covers Colby: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Colby Fire talkgroup 4460 (hex 116c).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Colby, start with the Colby site of Kansas Statewide Interoperable Communication System (KSICS), about 0 miles away. Its control channels: 857.4625, 857.9625 MHz.

Data updated .

Colby conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Colby
AgencyDescriptionFrequency (MHz)ToneModeFCC
Colby FireFire and EMS (Dispatch before KSICS)155.9400
In 153.9350
432 DPLFMNWNFF973

Colby trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Colby FireColby Fire – Dispatch4460116cD

Thomas County channels that also cover Colby

EMS Dispatch

EMS Dispatch frequencies for Thomas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Thomas County EMSThomas County EMS – Dispatch (before KSICS)462.9500
In 467.9500
192.8 PLFMNKNBJ887

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Thomas County EMSCounty EMS Dispatch4461116dD

Nearest trunked radio sites

Distances are measured from the center of Colby.

Colby · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 59 (hex 3B) · NAC 1B1 · about 0 mi away
Control 857.4625, 857.9625
Voice 856.4625, 858.4625, 859.4625, 859.9375
Halford · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 36 (hex 24) · NAC 1B5 · about 13 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Edson · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 39 (hex 27) · NAC 1B4 · about 27 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Colby?

Fire dispatch channels listed for Colby: Colby Fire 155.9400 MHz, narrow FM, 432 DPL.

What frequency does EMS or the ambulance service use in Colby?

We do not have a EMS dispatch channel listed specifically for Colby. The county-level EMS dispatch channels in the same county: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Colby?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Colby?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Colby?

For Colby, start with the Colby site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 857.4625, 857.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Colby fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Colby are marked encrypted.

Are Colby fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Colby are marked encrypted.