About Phillips County Police Frequencies
Quick answer: Dispatch for Phillips County: Phillips County Sheriff 155.1000 MHz, narrow FM, 136.5 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Phillips County Sheriff talkgroup 4572 (hex 11dc).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Phillips County, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.
Data updated .
Phillips County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Phillips County Sheriff | Phillips County Sheriff – Dispatch (Dispatch before KSICS) | 155.1000 In 158.8800 | 136.5 PL | FMN | KNNJ979 |
Phillips County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Phillips County Sheriff | Law Enforcement Dispatch | 4572 | 11dc | D |
| Phillips County Sheriff | Law Enforcement Tactical | 4573 | 11dd | D |
| Phillips County Sheriff | Law Enforcement Tactical | 4574 | 11de | D |
| Phillips County Sheriff | Law Enforcement Event | 4575 | 11df | D |
Radio system sites in Phillips County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Phillips County
Common questions
What frequency do the police use in Phillips County?
Dispatch channels listed for Phillips County: Phillips County Sheriff 155.1000 MHz, narrow FM, 136.5 PL.
What is the sheriff's dispatch frequency in Phillips County?
Phillips County Sheriff 155.1000 MHz, narrow FM, 136.5 PL.
Do the police use a trunked radio system in Phillips County?
Yes. Law-enforcement talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Phillips County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Phillips County?
For Phillips County, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Phillips County police frequencies encrypted?
None of the 1 conventional frequencies listed for Phillips County are marked encrypted.
Are Phillips County police talkgroups encrypted?
None of the 4 talkgroups listed for Phillips County are marked encrypted.