Skip to content

Phillips County Fire and EMS Frequencies

Phillips County in Kansas has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 31 cities and communities below for local fire departments and EMS agencies.

About Phillips County Fire and EMS Frequencies

Quick answer: Fire dispatch for Phillips County: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Phillips County Fire talkgroup 4576 (hex 11e0).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Phillips County, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.

Data updated .

Phillips County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County FireFire and EMS (before KSICS)154.2500
In 153.7700
156.7 PLFMNWNXD566
Phillips County FireFire and EMS (Dispatch before KSICS)154.3850
In 150.7750
431 DPLFMNWPVX391

Phillips County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Phillips County FirePhillips County Fire – Dispatch457611e0D
Phillips County EMSPhillips County EMS – Dispatch457711e1D

Radio system sites in Phillips County

Program the control channel first; your scanner finds the voice channels from it.

Phillipsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 28 (hex 1C)
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Phillips County

Common questions

What frequency does the fire department use in Phillips County?

Fire dispatch channels listed for Phillips County: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Phillips County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Phillips County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Phillips County?

For Phillips County, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Phillips County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Phillips County are marked encrypted.

Are Phillips County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Phillips County are marked encrypted.