Skip to content

Plainview Police Frequencies

We do not have frequencies listed specifically for Plainview in Phillips County, Kansas yet. Countywide channels for Phillips County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phillipsburg (Kansas Statewide Interoperable Communication System (KSICS)), about 17 miles away.

About Plainview Police Frequencies

Quick answer: County-level dispatch that covers Plainview: Phillips County Sheriff 155.1000 MHz, narrow FM, 136.5 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Phillips County Sheriff talkgroup 4572 (hex 11dc).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Plainview, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS), about 17 miles away. Its control channels: 852.2375, 852.9 MHz.

Data updated .

Phillips County channels that also cover Plainview

Dispatch

Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County SheriffPhillips County Sheriff – Dispatch (Dispatch before KSICS)155.1000
In 158.8800
136.5 PLFMNKNNJ979

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Phillips County SheriffLaw Enforcement Dispatch457211dcD
Phillips County SheriffLaw Enforcement Tactical457311ddD
Phillips County SheriffLaw Enforcement Tactical457411deD
Phillips County SheriffLaw Enforcement Event457511dfD

Nearest trunked radio sites

Distances are measured from the center of Plainview.

Phillipsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 28 (hex 1C) · about 17 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Zurich · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 29 (hex 1D) · NAC 1BB · about 20 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Norton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 33 (hex 21) · about 28 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Plainview?

We do not have a dispatch channel listed specifically for Plainview. The county sheriff's dispatch channels in the same county: Phillips County Sheriff 155.1000 MHz, narrow FM, 136.5 PL.

Do the police use a trunked radio system in Plainview?

Yes. The county-level systems that cover Plainview are Law-enforcement talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Plainview?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Plainview?

For Plainview, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.