Skip to content

Galt Fire and EMS Frequencies

We do not have frequencies listed specifically for Galt in Wright County, Iowa yet. Countywide channels for Wright County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Belmond (Iowa Statewide Interoperable Communications System (ISICS)), about 7 miles away.

About Galt Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Galt: Wright County Fire 154.1600 MHz, FM, 151.4 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Wright County Fire talkgroup 64818 (hex fd32).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Galt, start with the Belmond site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 770.68125, 774.55625, 774.80625 MHz.

Data updated .

Wright County channels that also cover Galt

Fire Dispatch

Fire Dispatch frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County FireWright County Fire – Dispatch154.1600
In 158.7750
151.4 PLFMKLE694
Wright County FireFire/EMS Dispatch155.5200136.5 PLFMKAB262

EMS Tactical

EMS Tactical frequencies for Wright County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wright County EMSWright County EMS – Tactical Channel155.2050FMWNAE268
Wright County EMSWright County EMS – Tactical Channel155.8650FMWNJK544

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Wright County FireWright County Fire – Dispatch64818fd32T
Wright County FireWright County Fire – Fire Ground64819fd33T
Wright County FireWright County Fire – Fire Ground64820fd34T
Wright County FireWright County Fire – Fire Ground64821fd35T
Wright County FireWright County Fire – Fire Ground64838fd46T
Wright County FireWright County Fire – Fire Ground64850fd52T
Wright County FireWright and Franklin County Fire/EMS Interop Talkgroup64853fd55T
Wright County EMSWright County EMS – Dispatch64822fd36T
Wright County EMSWright County EMS – Tactical Channel64823fd37T
Wright County EMSWright County EMS – Tactical Channel64824fd38T
Wright County HospitalHospital ER64826fd3aT
Wright County HospitalHospital64827fd3bT

Nearest trunked radio sites

Distances are measured from the center of Galt.

Belmond · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 100 (hex 64) · NAC 4C1 · about 7 mi away
Control 770.68125, 774.55625, 774.80625
Voice 770.93125
Eagle Grove · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 99 (hex 63) · NAC 4C9 · about 12 mi away
Control 770.95625, 774.58125, 774.83125
Voice 770.70625
Latimer · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 33 (hex 21) · NAC 4C3 · about 14 mi away
Control 769.95625, 770.20625, 770.45625
Voice 769.20625, 769.45625, 769.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Galt?

We do not have a fire dispatch channel listed specifically for Galt. The county-level fire dispatch channels in the same county: Wright County Fire 154.1600 MHz, FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Galt?

Yes. The county-level systems that cover Galt are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 12 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Galt?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Galt?

For Galt, start with the Belmond site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.68125, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.