About Belmond Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Belmond: Wright County Fire 154.1600 MHz, FM, 151.4 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Belmond Fire talkgroup 64845 (hex fd4d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Belmond, start with the Belmond site of Iowa Statewide Interoperable Communications System (ISICS), about 4 miles away. Its control channels: 770.68125, 774.55625, 774.80625 MHz.
Data updated .
Belmond trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Belmond Fire | Fire/EMS / Belmond | 64845 | fd4d | T |
Wright County channels that also cover Belmond
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wright County Fire | Wright County Fire – Dispatch | 154.1600 In 158.7750 | 151.4 PL | FM | KLE694 |
| Wright County Fire | Fire/EMS Dispatch | 155.5200 | 136.5 PL | FM | KAB262 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wright County EMS | Wright County EMS – Tactical Channel | 155.2050 | FM | WNAE268 | |
| Wright County EMS | Wright County EMS – Tactical Channel | 155.8650 | FM | WNJK544 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wright County Fire | Wright County Fire – Dispatch | 64818 | fd32 | T |
| Wright County Fire | Wright County Fire – Fire Ground | 64819 | fd33 | T |
| Wright County Fire | Wright County Fire – Fire Ground | 64820 | fd34 | T |
| Wright County Fire | Wright County Fire – Fire Ground | 64821 | fd35 | T |
| Wright County Fire | Wright County Fire – Fire Ground | 64838 | fd46 | T |
| Wright County Fire | Wright County Fire – Fire Ground | 64850 | fd52 | T |
| Wright County Fire | Wright and Franklin County Fire/EMS Interop Talkgroup | 64853 | fd55 | T |
| Wright County EMS | Wright County EMS – Dispatch | 64822 | fd36 | T |
| Wright County EMS | Wright County EMS – Tactical Channel | 64823 | fd37 | T |
| Wright County EMS | Wright County EMS – Tactical Channel | 64824 | fd38 | T |
| Wright County Hospital | Hospital ER | 64826 | fd3a | T |
| Wright County Hospital | Hospital | 64827 | fd3b | T |
Nearest trunked radio sites
Distances are measured from the center of Belmond.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Belmond?
We do not have a fire dispatch channel listed specifically for Belmond. The county-level fire dispatch channels in the same county: Wright County Fire 154.1600 MHz, FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Belmond?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Belmond?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Belmond?
For Belmond, start with the Belmond site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.68125, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Belmond fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Belmond are marked encrypted.