About Eldon Fire and EMS Frequencies
Quick answer: Fire dispatch for Eldon: Eldon Fire 158.8425 MHz, narrow FM, no tone.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Eldon conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Eldon Fire | Eldon Fire – Dispatch | 158.8425 | FMN | WQRM922 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Eldon Fire | Eldon Fire – Fire Ground | 159.4650 In 153.7700 | 346 DPL | FMN | WPUL704 |
Wapello County channels that also cover Eldon
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wapello County Fire | Agency / Blakesburg Fire Dispatch | 154.0325 | FMN | WPHA688 | |
| Wapello County Fire | Rural Fire Dispatch | 154.1075 | FMN | WPHA688 | |
| Wapello County Fire | Wapello County Fire – Dispatch | 154.1300 | 156.7 PL | FMN | WPNS535 |
| Wapello County Fire | Wapello County Fire – Dispatch | 154.1900 In 158.9250 | 123.0 PL | FMN | WPNS535 |
| Wapello County Fire | Wapello County Fire – Dispatch | 155.0625 | NAC FDE | P25 | WPHA688 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wapello County Hospital | Regional EMS | 155.1750 | 85.4 PL | FMN | KCE662 |
| Wapello County Hospital | Regional EMS | 155.2050 In 150.7750 | 85.4 PL | FMN | KCE662 |
Nearest trunked radio sites
Distances are measured from the center of Eldon.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eldon?
Fire dispatch channels listed for Eldon: Eldon Fire 158.8425 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Eldon?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Eldon?
For Eldon, start with the Bloomfield site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Eldon fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Eldon are marked encrypted.