Skip to content

Pulaski Fire and EMS Frequencies

We do not have frequencies listed specifically for Pulaski in Davis County, Iowa yet. Countywide channels for Davis County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bloomfield (Iowa Statewide Interoperable Communications System (ISICS)), about 10 miles away.

About Pulaski Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pulaski: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Pulaski: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Davis County channels that also cover Pulaski

Fire Dispatch

Fire Dispatch frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County FireDavis County Fire – Dispatch154.3850123.0 PLFMNWSL596
Davis County FireP25 Fire Dispatch154.3850NAC 26FP25WSL596
Davis County FireFire / EMS Paging155.5350CSQFMNKAD447

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County FireDavis County Fire – Fire Ground158.8650123.0 PLFMNWSL596

EMS Dispatch

EMS Dispatch frequencies for Davis County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Davis County EMSDispatch and Response159.0900
In 153.9800
146.2 PLFMNKAD447
Davis County EMSP25 EMS Dispatch and Response159.0900
In 153.9800
NAC 26AP25KAD447

Nearest trunked radio sites

Distances are measured from the center of Pulaski.

Bloomfield · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 27 (hex 1B) · NAC 4C3 · about 10 mi away
Control 769.96875, 770.21875, 770.46875
Keosauqua · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 50 (hex 32) · about 18 mi away
Control 773.83125, 774.08125, 774.33125
Centerville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 7 (hex 7) · NAC 4C2 · about 31 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pulaski?

We do not have a fire dispatch channel listed specifically for Pulaski. The county-level fire dispatch channels in the same county: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Pulaski?

We do not have a EMS dispatch channel listed specifically for Pulaski. The county-level EMS dispatch channels in the same county: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Pulaski?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Pulaski?

For Pulaski, start with the Bloomfield site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.