About Bloomfield Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bloomfield: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Bloomfield: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Davis County channels that also cover Bloomfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Davis County Fire | Davis County Fire – Dispatch | 154.3850 | 123.0 PL | FMN | WSL596 |
| Davis County Fire | P25 Fire Dispatch | 154.3850 | NAC 26F | P25 | WSL596 |
| Davis County Fire | Fire / EMS Paging | 155.5350 | CSQ | FMN | KAD447 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Davis County Fire | Davis County Fire – Fire Ground | 158.8650 | 123.0 PL | FMN | WSL596 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Davis County EMS | Dispatch and Response | 159.0900 In 153.9800 | 146.2 PL | FMN | KAD447 |
| Davis County EMS | P25 EMS Dispatch and Response | 159.0900 In 153.9800 | NAC 26A | P25 | KAD447 |
Nearest trunked radio sites
Distances are measured from the center of Bloomfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bloomfield?
We do not have a fire dispatch channel listed specifically for Bloomfield. The county-level fire dispatch channels in the same county: Davis County Fire 154.3850 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Bloomfield?
We do not have a EMS dispatch channel listed specifically for Bloomfield. The county-level EMS dispatch channels in the same county: Davis County EMS 159.0900 MHz, narrow FM, 146.2 PL.
What scanner do I need to listen to fire and EMS in Bloomfield?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Bloomfield?
For Bloomfield, start with the Bloomfield site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.