Skip to content

Conway Fire and EMS Frequencies

We do not have frequencies listed specifically for Conway in Taylor County, Iowa yet. Countywide channels for Taylor County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Corning (Iowa Statewide Interoperable Communications System (ISICS)), about 19 miles away.

About Conway Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Conway: Taylor County Fire 154.2050 MHz, narrow FM, 136.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Taylor County channels that also cover Conway

Fire Dispatch

Fire Dispatch frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Taylor County FireTaylor County Fire – Dispatch154.2050
In 150.7900
136.5 PLFMNWPCC623

Nearest trunked radio sites

Distances are measured from the center of Conway.

Corning · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 3 (hex 3) · NAC 4C3 · about 19 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Mt. Ayr · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 77 (hex 4D) · NAC 4C0 · about 20 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Braddyville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 72 (hex 48) · about 26 mi away
Control 773.83125, 774.08125, 774.33125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Conway?

We do not have a fire dispatch channel listed specifically for Conway. The county-level fire dispatch channels in the same county: Taylor County Fire 154.2050 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Conway?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Conway?

For Conway, start with the Corning site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.