Skip to content

Blockton Fire and EMS Frequencies

We do not have frequencies listed specifically for Blockton in Taylor County, Iowa yet. Countywide channels for Taylor County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mt. Ayr (Iowa Statewide Interoperable Communications System (ISICS)), about 13 miles away.

About Blockton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Blockton: Taylor County Fire 154.2050 MHz, narrow FM, 136.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Taylor County channels that also cover Blockton

Fire Dispatch

Fire Dispatch frequencies for Taylor County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Taylor County FireTaylor County Fire – Dispatch154.2050
In 150.7900
136.5 PLFMNWPCC623

Nearest trunked radio sites

Distances are measured from the center of Blockton.

Mt. Ayr · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 77 (hex 4D) · NAC 4C0 · about 13 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Corning · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 3 (hex 3) · NAC 4C3 · about 31 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Union Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 64 (hex 40) · NAC 4C2 · about 31 mi away
Control 770.90625, 774.53125, 774.78125
Voice 770.65625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Blockton?

We do not have a fire dispatch channel listed specifically for Blockton. The county-level fire dispatch channels in the same county: Taylor County Fire 154.2050 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Blockton?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Blockton?

For Blockton, start with the Mt. Ayr site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.