Skip to content

Orchard Fire and EMS Frequencies

We do not have frequencies listed specifically for Orchard in Mitchell County, Iowa yet. Countywide channels for Mitchell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Floyd Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 11 miles away.

About Orchard Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Orchard: Mitchell County Fire 154.3550 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Orchard: Mitchell County EMS 151.4600 MHz, FM, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Mitchell County channels that also cover Orchard

Fire Dispatch

Fire Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireMitchell County Fire – Dispatch154.3550
In 150.7900
94.8 PLFMNWPYE254

EMS Dispatch

EMS Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSCounty EMS151.4600
In 159.3300
FMWPYE254

Nearest trunked radio sites

Distances are measured from the center of Orchard.

Floyd Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 34 (hex 22) · about 11 mi away
Control 774.33125
Voice 773.58125, 773.83125
Mason City · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 65 (hex 41) · NAC 4C4 · about 23 mi away
Control 769.90625, 770.15625, 770.40625
Voice 769.65625
Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3 · about 24 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Orchard?

We do not have a fire dispatch channel listed specifically for Orchard. The county-level fire dispatch channels in the same county: Mitchell County Fire 154.3550 MHz, narrow FM, 94.8 PL.

What frequency does EMS or the ambulance service use in Orchard?

We do not have a EMS dispatch channel listed specifically for Orchard. The county-level EMS dispatch channels in the same county: Mitchell County EMS 151.4600 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Orchard?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Orchard?

For Orchard, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.