Skip to content

Rudd Fire and EMS Frequencies

Rudd in Floyd County, Iowa has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Floyd Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 7 miles away.

About Rudd Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rudd: Floyd County Fire 154.4150 MHz, FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Rudd Fire talkgroup 29718 (hex 7416).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rudd, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 774.33125 MHz.

Data updated .

Rudd trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Rudd FireRudd Fire Tactical297187416T

Floyd County channels that also cover Rudd

Fire Dispatch

Fire Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County FireFloyd County Fire – Dispatch – 85.4 PL???154.4150CSQFMKDQ201

Hospitals & Medical

Hospitals & Medical frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County HospitalMemorial Hospital155.3250FMKJN743

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Floyd County FireFire Main29711740fT
Floyd County FireFloyd County Fire – Tactical Channel297127410T
Floyd County FireWater Suppply297217419T
Floyd County FireSAR Tactical297297421T
Floyd County EMSEMS Main29722741aT

Nearest trunked radio sites

Distances are measured from the center of Rudd.

Floyd Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 34 (hex 22) · about 7 mi away
Control 774.33125
Voice 773.58125, 773.83125
Mason City · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 65 (hex 41) · NAC 4C4 · about 15 mi away
Control 769.90625, 770.15625, 770.40625
Voice 769.65625
Northwood · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 97 (hex 61) · NAC 4C8 · about 27 mi away
Control 770.96875, 774.59375, 774.84375
Voice 770.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rudd?

We do not have a fire dispatch channel listed specifically for Rudd. The county-level fire dispatch channels in the same county: Floyd County Fire 154.4150 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Rudd?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rudd?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rudd?

For Rudd, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rudd fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Rudd are marked encrypted.