Skip to content

Colwell Fire and EMS Frequencies

Colwell in Floyd County, Iowa has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Floyd Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 12 miles away.

About Colwell Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Colwell: Floyd County Fire 154.4150 MHz, FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Colwell Fire talkgroup 29715 (hex 7413).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Colwell, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 12 miles away. Its control channels: 774.33125 MHz.

Data updated .

Colwell trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Colwell FireColwell Fire Tactical297157413T

Floyd County channels that also cover Colwell

Fire Dispatch

Fire Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County FireFloyd County Fire – Dispatch – 85.4 PL???154.4150CSQFMKDQ201

Hospitals & Medical

Hospitals & Medical frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County HospitalMemorial Hospital155.3250FMKJN743

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Floyd County FireFire Main29711740fT
Floyd County FireFloyd County Fire – Tactical Channel297127410T
Floyd County FireWater Suppply297217419T
Floyd County FireSAR Tactical297297421T
Floyd County EMSEMS Main29722741aT

Nearest trunked radio sites

Distances are measured from the center of Colwell.

Floyd Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 34 (hex 22) · about 12 mi away
Control 774.33125
Voice 773.58125, 773.83125
Chickasaw Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 19 (hex 13) · NAC 4C4 · about 15 mi away
Control 769.96875, 770.21875, 770.46875
Voice 769.71875
Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3 · about 17 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Colwell?

We do not have a fire dispatch channel listed specifically for Colwell. The county-level fire dispatch channels in the same county: Floyd County Fire 154.4150 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Colwell?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Colwell?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Colwell?

For Colwell, start with the Floyd Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Colwell fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Colwell are marked encrypted.