Skip to content

Elma Fire and EMS Frequencies

We do not have frequencies listed specifically for Elma in Howard County, Iowa yet. Countywide channels for Howard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lourdes (Iowa Statewide Interoperable Communications System (ISICS)), about 8 miles away.

About Elma Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elma: Howard County Fire 154.4000 MHz, FM, 445 DPL. County-level ems dispatch that covers Elma: Howard County EMS 159.4425 MHz, narrow FM, 532 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Howard County channels that also cover Elma

Fire Dispatch

Fire Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County FireHoward County Fire – Dispatch154.4000
In 153.8900
445 DPLFMKDW967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County FireFire Scene159.0000445 DPLFMNWQMN376
Howard County FireFire Scene159.1950445 DPLFMNWQMN376

EMS Dispatch

EMS Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County EMSHoward County EMS – Dispatch159.4425
In 153.9125
532 DPLFMNWQNG447

Nearest trunked radio sites

Distances are measured from the center of Elma.

Lourdes · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 59 (hex 3B) · NAC 4C3 · about 8 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.69375
Chickasaw Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 19 (hex 13) · NAC 4C4 · about 14 mi away
Control 769.96875, 770.21875, 770.46875
Voice 769.71875
Floyd Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 34 (hex 22) · about 21 mi away
Control 774.33125
Voice 773.58125, 773.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elma?

We do not have a fire dispatch channel listed specifically for Elma. The county-level fire dispatch channels in the same county: Howard County Fire 154.4000 MHz, FM, 445 DPL.

What frequency does EMS or the ambulance service use in Elma?

We do not have a EMS dispatch channel listed specifically for Elma. The county-level EMS dispatch channels in the same county: Howard County EMS 159.4425 MHz, narrow FM, 532 DPL.

What scanner do I need to listen to fire and EMS in Elma?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Elma?

For Elma, start with the Lourdes site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.94375, 770.19375, 770.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.