About Williamson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Williamson: Lucas County Fire 154.4000 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Williamson: Lucas County Health Center 151.4150 MHz, narrow FM, 167.9 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Lucas County Fire talkgroup 41701 (hex a2e5).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Williamson, start with the Chariton site of Iowa Statewide Interoperable Communications System (ISICS), about 8 miles away. Its control channels: 769.93125, 770.18125, 770.43125 MHz.
Data updated .
Lucas County channels that also cover Williamson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lucas County Fire | Lucas County Fire – Dispatch | 154.4000 | 186.2 PL | FMN | WQMP889 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lucas County Health Center | Lucas County Health Center – Dispatch | 151.4150 | 167.9 PL | FMN | KUT426 |
| Lucas County Health Center | Vehicle Repeaters | 465.2000 | FMN | KUT426 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lucas County Health Center | Operations | 163.2500 | FM | KUT426 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lucas County Fire | Fire Operations | 41701 | a2e5 | T |
| Lucas County Hospital | Hospital Tactical | 41702 | a2e6 | T |
Nearest trunked radio sites
Distances are measured from the center of Williamson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Williamson?
We do not have a fire dispatch channel listed specifically for Williamson. The county-level fire dispatch channels in the same county: Lucas County Fire 154.4000 MHz, narrow FM, 186.2 PL.
What frequency does EMS or the ambulance service use in Williamson?
We do not have a EMS dispatch channel listed specifically for Williamson. The county-level EMS dispatch channels in the same county: Lucas County Health Center 151.4150 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Williamson?
Yes. The county-level systems that cover Williamson are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Williamson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Williamson?
For Williamson, start with the Chariton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.93125, 770.18125, 770.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.