Skip to content

Melrose Fire and EMS Frequencies

We do not have frequencies listed specifically for Melrose in Monroe County, Iowa yet. Countywide channels for Monroe County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Albia (Iowa Statewide Interoperable Communications System (ISICS)), about 13 miles away.

About Melrose Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Melrose: Monroe County Fire 154.1750 MHz, narrow FM, CSQ.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Monroe County channels that also cover Melrose

Fire Dispatch

Fire Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Monroe County FireMonroe County Fire – Dispatch154.1750CSQFMNWPZX575
Monroe County FireFire Operations155.2500
In 159.4200
NAC 68FP25WPZX575

Nearest trunked radio sites

Distances are measured from the center of Melrose.

Albia · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 4 (hex 4) · NAC 4C4 · about 13 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
Chariton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 60 (hex 3C) · NAC 4C6 · about 13 mi away
Control 769.93125, 770.18125, 770.43125
Voice 769.68125
Centerville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 7 (hex 7) · NAC 4C2 · about 21 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Melrose?

We do not have a fire dispatch channel listed specifically for Melrose. The county-level fire dispatch channels in the same county: Monroe County Fire 154.1750 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Melrose?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Melrose?

For Melrose, start with the Albia site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.