Skip to content

Milo Fire and EMS Frequencies

We do not have frequencies listed specifically for Milo in Warren County, Iowa yet. Countywide channels for Warren County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Warren Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 7 miles away.

About Milo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Milo: Warren County Fire 154.3700 MHz, FM, 85.4 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Warren County Fire talkgroup 59940 (hex ea24).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Milo, start with the Warren Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 7 miles away. Its control channels: 773.06875, 773.31875, 774.06875 MHz.

Data updated .

Warren County channels that also cover Milo

Fire Dispatch

Fire Dispatch frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warren County FireWarren County Fire – Dispatch154.370085.4 PLFMWPYG970

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warren County FireWarren County Fire – Fire Ground153.8300FMWPYG970
Warren County FireWarren County Fire – Fire Ground153.8900FMWPYG970
Warren County FireWarren County Fire – Fire Ground154.2050047 DPLFMWPYG970

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Warren County FireDispatch Patch- 154.37059940ea24T
Warren County FireWarren County Fire – Fire Ground59941ea25T
Warren County FireWarren County Fire – Fire Ground59942ea26T

Nearest trunked radio sites

Distances are measured from the center of Milo.

Warren Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 43 (hex 2B) · NAC 4C2 · about 7 mi away
Control 773.06875, 773.31875, 774.06875, 774.31875
Knoxville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 63 (hex 3F) · NAC 4C3 · about 20 mi away
Control 769.41875, 770.66875, 770.91875
Voice 769.16875
Chariton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 60 (hex 3C) · NAC 4C6 · about 22 mi away
Control 769.93125, 770.18125, 770.43125
Voice 769.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Milo?

We do not have a fire dispatch channel listed specifically for Milo. The county-level fire dispatch channels in the same county: Warren County Fire 154.3700 MHz, FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Milo?

Yes. The county-level systems that cover Milo are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Milo?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Milo?

For Milo, start with the Warren Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.06875, 773.31875, 774.06875, 774.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.